Complete Kit Ready to Fit
Available in two shelf depths of either 310mm or 410mm
The 310mm kit comes with two shelves of the same depth.
NOTE: The 410mm kit comes with one 410mm deep shelf for the bottom and one 310mm deep shelf for the top due to the curvature of the vans side.
The shelves have a high back lip with a low front lip.
The 'L' profile shelves is primarily suited for the storing of systainer® and other cases.
The 310mm deep shelf are ideal for the systainer® T-Loc or Makita and other containers with a maximum 300mm depth.
While the 410mm are suitable for DeWalt or Sortimo and other containers with a maximum 400mm depth.
Made in Germany from 100% anodised aluminium.
Fits vans with a cargo height up to 2280mm, and length of 2070mm minimum.
These are the measurements inside the cargo area from floor to ceiling, and bulkhead to rear doors.
2 - aluminium struts with ceiling quick release telescopic adaptors, and floor plug adaptors.
(Note: We will machine your poles to suit your vehicle height, by contacting you direct once you have placed your order.)
4 - Velcro® self-adhesive fleece (two for floor and two for ceiling).
4 - Velcro® mats with adaptor cones (two for the floor and two for the ceiling).
2 - Velcro® cover mats to protect the floor Velcro® fleece when the racking is removed.
2 - traverse bars 1670mm with end caps.
2 - 'L' profile shelves 1670mm long by 310mm or 410mm deep.
6 - triangular shelf support brackets with screws.
4 - pole adaptor brackets with screws.
4 - divider/end plates with screws.
1 - Tool kit (five-parts).
310mm deep kit 28.2kg
410mm deep kit 30.2kg
Maximum load capacity:
120 kg (without brace support)
150 kg (with brace support)
50 kg per shelf
NOTE: If the vehicle has a ceiling lining, this must be removed before assembling.