Complete Kit Ready to Fit

Available in two shelf depths of either 310mm or 410mm
1 x 1260mm long by 310mm or 410mm deep shelf (for the bulkhead)
1 x 2070mm long by 310mm or 410mm deep shelf (for the side)
Each shelf has a high back lip with a low front lip.
The 'L' profile shelves are primarily suited for the storing of systainer® and other cases.
The 310mm deep shelves are ideal for the systainer® T-Loc or Makita and other containers with a maximum 300mm depth.
While the 410mm are suitable for DeWalt or Sortimo and other containers with a maximum 400mm depth.
Made in Germany from 100% anodised aluminium.
Fits vans with a cargo height up to 2280mm, and length of 2070mm minimum.

These are the measurements inside the cargo area from floor to ceiling, and bulkhead to rear doors.

Kit Contents:
3 - aluminium struts with ceiling quick release telescopic adaptors, and floor plug adaptors.
(Note: We will machine your poles to suit your vehicle height, by contacting you direct once you have placed your order.)
6 - Velcro® self-adhesive fleece (two for floor and two for ceiling).
6- Velcro® mats with adaptor cones (two for the floor and two for the ceiling).
3 - Velcro® cover mats to protect the floor Velcro® fleece when the racking is removed.
1 - traverse bar 1260mm with end caps.
1 - 'L' profile shelf 1260mm long by 310mm or 410mm deep
1 - traverse bar 2070mm with end caps.
1 - 'L' profile shelf 2070mm long by 310mm or 410mm deep
6 - triangular shelf support brackets with screws.
4 - pole adaptor brackets with screws.
4 - divider/end plates with screws.
1 - Tool kit (five-parts).

Approx Weight:
310mm deep kit 34.1kg
410mm deep kit 36.5kg

Maximum load capacity:
120 kg (without brace support)
150 kg (with brace support)
50 kg per shelf

NOTE: If the vehicle has a ceiling lining, this must be removed before assembling.